Industrial Humidification - Plant Cooling
Air and Water Systems
Air and Water Systems ArcticMist High Velocity Misting Fans for Humidification
ADDITIONAL
HOME
CONTACT
HUMIDIFICATION
COOLING

AWS footer
ArcticMist pdf Product Page
SPACEMIST INDUSTRIAL HIGH PRESSURE (1000 PSI) HUMIDIFICATION SYSTEM

24" SpaceMist 360° Horizontal Misting

Danfoss Valves

 

High Pressure (1000 psi) Atomized Water
Into 2100 cfm Air Stream
Uses NO compressed air for ceilings  as low as 8'
 
• Pump Control Station:  US Mfg Pulley Driven 1000 psi Pump – preplumbed, prewired & tested – ready to spray; 5 & 1 Micron Pre-Filters; Auto Stop for water disruption; Auto Pressure Relief Electric Drain Valve.
    .35 gpm 1/2 hp (Capacity: Maximum - 175 lbs/hr; Minimum - 44 lbs/hr).
    1.0 gpm 1 hp (Capacity: Maximum - 500 lbs/hr; Minimum - 125 lbs/hr).

• Humidistat/Sensor Controller (Plug-In):  Automatically operates the pump on/off cycle maintaining ±7% humidity set point. 120V / 15 amps w/ on/off indicator lights; 8” x 6” x 3.5”.

• Flexible Nylon #12 - 3/8" High Pressure Tube: 3550 psi rated burst pressure tube – requires only a cutting tool.

• 3/8" Slip-Lok Fittings: Push-to-Connect nickel plated w/ locking ferrules & over sized O-ring for complete leak proof seal. To remove tubing, apply pressure against the fitting and pull tube away from the fitting.

• 24" SpaceMist 360° Misting (Part# SMFAN2410): Quiet Axial Fan (64 Db) with a UL507 listed outdoor rated fan; White powder coated housing; Ceiling mount with bracket (mounts flush to dropped ceiling or chain hung); 2100 cfm 1/4 hp motor / 60Hz/110V/1.9 amps w/ 20’ cord; Stainless steel mist ring w/ 5 or 10 nozzle positions & w/ 4 or 8 lbs/hr/nozzle (10, 40, or 80 lbs/hr/fan). Dimensions 24” dia. x 9.75” h; Weight 25 lbs.

• Ceramic Insert Stainless Steel Nozzles: Ceramic “no plug – no stick” surface; 350 psi spring assembly for “zero leaks & drips”; all Viton seat / o-rings – high wear resistance.

 

Key Features:

Operational Features:
• Humidifies up to 15,000ft2 x 12’ ceilings – maintains 45% RH @ 72˚F.
• Installer Friendly – uses flexible tube & slip-lok fittings.
• All moisture evaporated within twenty foot diameter.